Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Skiving knife | Leather pieces |
| Cutting board | |
| Edge beveler | |
| Leather marking pen |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Leather pieces | 4 Pcs per Candidate |
| 2 | Skiving knife | 1 Pc per Candidate |
| 3 | Cutting board | 1 Pc per Candidate |
| 4 | Edge beveler | 1 Pc per Candidate |
| 5 | Leather marking pen | 1 Pc per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Prepare and skive leather edges | |||
| Use of appropriate PPE before starting work (Award 2 marks for correct PPE use, zero if not) | 2 | ||
| Correctly marks skiving area on leather edges using leather marking pen (Award 3 marks for clear and accurate marking) | 3 | ||
| Positions leather pieces properly on cutting board for skiving (Award 2 marks for stable and safe positioning) | 2 | ||
| Uses skiving knife correctly to reduce edge thickness uniformly (Award 5 marks for smooth, even skiving along all edges) | 5 | ||
| Employs edge beveler to finish skived edges neatly (Award 3 marks for clean, beveled edges without damage) | 3 | ||
| Sub-Total | 15 | ||
| PRODUCT CHECKLIST | |||
| Leather edges skived to uniform thickness of 1.5mm ±0.2mm (Award 8 marks if all edges are within tolerance, zero otherwise) | 8 | ||
| Skived edges smooth without nicks or unevenness (Award 6 marks for smooth edges free of defects) | 6 | ||
| Leather pieces remain undamaged and clean after skiving (Award 6 marks if no cuts or stains are present) | 6 | ||
| Sub-Total | 20 | ||
| GRAND TOTAL | 35 | ||
Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Skiving knife | Synthetic upper material sheets |
| Cutting board | |
| Ruler | |
| Marking chalk |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Synthetic upper material sheets | 3 sheets per Candidate |
| 2 | Skiving knife | 1 per Candidate |
| 3 | Cutting board | 1 per Candidate |
| 4 | Ruler (30 cm steel) | 1 per Candidate |
| 5 | Marking chalk | 1 piece per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Perform skiving operations on synthetic material | |||
| Candidate wears appropriate PPE before starting (Award 2 marks for correct PPE worn, zero if not) | 2 | ||
| Candidate marks the skiving area clearly on synthetic material (Award 3 marks for clear, accurate marking as per drawing) | 3 | ||
| Candidate sets up cutting board and tools safely and ergonomically (Award 2 marks for proper setup) | 2 | ||
| Candidate performs skiving to reduce thickness uniformly by 1.5 mm over 150 mm length (Award 6 marks for uniform thickness reduction as per specs) | 6 | ||
| Candidate maintains control of the skiving knife to avoid tearing or uneven edges (Award 3 marks for smooth edges and no material damage) | 3 | ||
| Candidate cleans work area and tools after completing skiving (Award 2 marks for proper cleaning and tidying) | 2 | ||
| Sub-Total | 18 | ||
| PRODUCT CHECKLIST | |||
| Skived synthetic component thickness reduced uniformly by 1.5 mm along 150 mm length (Award 12 marks for thickness within ±0.2 mm tolerance and length accuracy) | 12 | ||
| Edges of skived area are smooth and free from tears or roughness (Award 8 marks for uniform smooth edges as per quality standards) | 8 | ||
| Dimensions of skived section match the drawing exactly (150 mm length) (Award 7 marks for dimensional accuracy of length) | 7 | ||
| Sub-Total | 27 | ||
| GRAND TOTAL | 45 | ||