Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Edge trimming knife | Leather upper component |
| Edge beveler | Edge finishing compound |
| Sandpaper (medium grit) | |
| Cotton cloth |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Leather upper component | 1 Pc per Candidate |
| 2 | Edge trimming knife | 1 Pc per Candidate |
| 3 | Edge beveler | 1 Pc per Candidate |
| 4 | Sandpaper (medium grit) | 2 Sheets per Candidate |
| 5 | Edge finishing compound | 50 ml per Candidate |
| 6 | Cotton cloth | 1 Pc per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Prepare and trim edges | |||
| Candidate wears appropriate PPE before starting work (Award 2 marks for correct PPE use, 0 if none) | 2 | ||
| Candidate sets up workstation in a safe and organized manner (Award 2 marks for proper setup, 0 if unsafe or disorganized) | 2 | ||
| Candidate uses edge trimming knife to remove excess leather evenly (Award 3 marks for even and accurate trimming, 0 otherwise) | 3 | ||
| Candidate shapes edges using edge beveler to uniform bevel (Award 3 marks for uniform beveling on all edges, 0 otherwise) | 3 | ||
| Candidate smoothens edges with medium grit sandpaper effectively (Award 3 marks for smooth finish with no rough patches, 0 otherwise) | 3 | ||
| Candidate applies edge finishing compound evenly using cotton cloth (Award 2 marks for even application, 0 if uneven or missed) | 2 | ||
| Sub-Total | 15 | ||
| PRODUCT CHECKLIST | |||
| Edges trimmed to approximately 250mm x 150mm dimensions with uniform bevel (Award 5 marks if dimensions and bevel uniformity meet drawing specification) | 5 | ||
| Edges are smooth to touch without roughness or cuts (Award 5 marks if edges are smooth and free from defects) | 5 | ||
| Edge finishing compound applied uniformly with no excess or gaps (Award 5 marks for neat and uniform finishing) | 5 | ||
| Sub-Total | 15 | ||
| GRAND TOTAL | 30 | ||
Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Edge beveler tool | Leather components (outer upper parts) |
| Sanding block | Edge finishing gum |
| Cloth for polishing |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Leather components (outer upper parts) | 3 Pcs per Candidate |
| 2 | Edge beveler tool | 1 Pc per Candidate |
| 3 | Sanding block | 1 Pc per Candidate |
| 4 | Edge finishing gum | 1 Bottle per 5 Candidates |
| 5 | Cloth for polishing | 1 Pc per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Edge Beveling Process | |||
| Candidate wears appropriate PPE (gloves, apron) (Award 2 marks for correct PPE use, zero if not) | 2 | ||
| Candidate correctly sets out and secures leather components before beveling (Award 3 marks for proper setup and secure positioning) | 3 | ||
| Candidate uses the edge beveler tool correctly to bevel edges evenly (Award 2 marks per component for even beveling, total 6 marks) | 6 | ||
| Candidate smooths bevelled edges using sanding block uniformly (Award 1 mark per component for smooth, uniform edges) | 4 | ||
| Candidate applies edge finishing gum evenly along bevelled edges (Award 1 mark per component for correct application) | 3 | ||
| Candidate polishes edges with cloth to achieve uniform gloss (Award 1 mark per component for uniform gloss finish) | 4 | ||
| Sub-Total | 22 | ||
| PRODUCT CHECKLIST | |||
| Edges bevelled to approximately 2mm width uniformly on all 3 components (Award 2 marks per component for correct bevel width and uniformity) | 6 | ||
| Edges are smooth, free from roughness or tears (Award 2 marks per component for smooth, clean edges) | 6 | ||
| Edge finishing gum applied evenly without excess or gaps (Award 1.33 marks per component for neat application) | 4 | ||
| Final edge finish shows uniform gloss and no visible defects (Award 1.33 marks per component for uniform gloss and quality finish) | 4 | ||
| Sub-Total | 20 | ||
| GRAND TOTAL | 42 | ||