Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Cutting knife | Leather sheets |
| Cutting board | Synthetic lining material |
| Measuring ruler 300mm | |
| Chalk marker | |
| Pattern templates for footwear upper components |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Leather sheets | 2.5 sq.m per Candidate |
| 2 | Synthetic lining material | 1.5 sq.m per Candidate |
| 3 | Cutting knife | 1 Pc per Candidate |
| 4 | Cutting board | 1 Pc per Candidate |
| 5 | Measuring ruler 300mm | 1 Pc per Candidate |
| 6 | Chalk marker | 1 Pc per Candidate |
| 7 | Pattern templates for footwear upper components | 1 Set per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Cutting Preparation and Safety | |||
| Candidate wears appropriate PPE before starting cutting (Award 2 marks for correct PPE use; 0 if omitted) | 2 | ||
| Candidate sets up cutting board and arranges materials neatly (Award 2 marks for proper setup and material arrangement) | 2 | ||
| Candidate selects and inspects cutting knife for sharpness and safety (Award 2 marks for proper tool selection and inspection) | 2 | ||
| Sub-Total | 6 | ||
| TASK 2: Accurate Marking and Layout | |||
| Candidate correctly places pattern templates on leather and lining (Award 3 marks for accurate placement without wastage) | 3 | ||
| Candidate marks outlines clearly and accurately with chalk marker (Award 3 marks for neat, visible, and precise marking) | 3 | ||
| Candidate measures key dimensions on patterns to ensure accuracy (Award 3 marks for verifying pattern dimensions against templates) | 3 | ||
| Sub-Total | 9 | ||
| TASK 3: Cutting Execution | |||
| Candidate cuts leather components cleanly following marked outlines (Award 4 marks for smooth, precise cutting without ragged edges) | 4 | ||
| Candidate cuts lining material accurately to match leather pieces (Award 4 marks for matching lining cut to leather component sizes) | 4 | ||
| Candidate handles cutting knife safely throughout the process (Award 3 marks for safe knife handling without accidents) | 3 | ||
| Sub-Total | 11 | ||
| PRODUCT CHECKLIST | |||
| Finished upper components cut to dimensions approximately 300mm x 150mm with clean edges and correct shapes (Award up to 10 marks for accuracy of dimensions, shape conformity, and edge neatness) | 10 | ||
| All required components (vamp, quarter, tongue) present and correctly cut from both leather and lining materials (Award 8 marks for completeness and correct matching of components) | 8 | ||
| No damage or unnecessary wastage on materials evident (Award 5 marks for efficient material use and absence of damage) | 5 | ||
| Sub-Total | 23 | ||
| GRAND TOTAL | 49 | ||
Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Skiving knife | Leather components (upper and lining) |
| Cutting board | |
| Edge beveler | |
| Sanding block | |
| Marker pen |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Skiving knife | 1 Pc per Candidate |
| 2 | Cutting board | 1 Pc per Candidate |
| 3 | Leather components (upper and lining) | 3 Pcs per Candidate |
| 4 | Edge beveler | 1 Pc per Candidate |
| 5 | Sanding block | 1 Pc per Candidate |
| 6 | Marker pen | 1 Pc per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Skiving and thinning process | |||
| Candidate wears appropriate PPE before starting (Award 2 marks for correct PPE use, zero if not) | 2 | ||
| Candidate correctly sets up the cutting board and secures components (Award 3 marks for proper setup and secure placement) | 3 | ||
| Candidate marks edges to be skived accurately with marker pen (Award 3 marks for clear and precise marking) | 3 | ||
| Candidate uses skiving knife safely and correctly to thin edges (Award 5 marks for proper technique and safety) | 5 | ||
| Candidate uses edge beveler to shape the skived edges uniformly (Award 4 marks for uniform beveling) | 4 | ||
| Candidate smooths edges with sanding block to remove roughness (Award 3 marks for smooth finishing) | 3 | ||
| Sub-Total | 20 | ||
| PRODUCT CHECKLIST | |||
| Edges skived to uniform thickness with minimum 1.5mm thinning over 150mm length and 80mm width components (Award 10 marks for correct thinning dimensions and uniformity) | 10 | ||
| Edges smooth and free of cuts, tears or uneven surfaces (Award 8 marks for neat, clean finished edges) | 8 | ||
| Skived edges match the shape and size indicated in the working drawing (Award 7 marks for conformity to drawing dimensions) | 7 | ||
| Sub-Total | 25 | ||
| GRAND TOTAL | 45 | ||