Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Soft cloth | Cleaning solvent |
| Horsehair brush | Shoe upper |
| Rubber gloves |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Soft cloth | 2 pcs per Candidate |
| 2 | Horsehair brush | 1 pc per Candidate |
| 3 | Cleaning solvent (100 ml) | 100 ml per Candidate |
| 4 | Rubber gloves | 1 pair per Candidate |
| 5 | Shoe upper (280mm length) | 1 pc per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Cleaning and preparing shoe uppers | |||
| Candidate wears appropriate PPE (rubber gloves) (Award 2 marks for wearing gloves, 0 if not) | 2 | ||
| Candidate uses horsehair brush to remove dust from shoe upper (Award 3 marks for thorough dust removal, 0 if missed) | 3 | ||
| Candidate applies cleaning solvent correctly on soft cloth (Award 3 marks for correct solvent use, 0 if solvent misused) | 3 | ||
| Candidate cleans shoe upper surface evenly removing grease and impurities (Award 4 marks for even cleaning, 0 if patchy) | 4 | ||
| Candidate allows shoe upper to dry appropriately before finishing (Award 3 marks for proper drying time, 0 if neglected) | 3 | ||
| Sub-Total | 15 | ||
| PRODUCT CHECKLIST | |||
| Shoe upper cleaned thoroughly with no visible dust, grease or stains on 280mm length (Award up to 10 marks for cleanliness and readiness for finishing) | 10 | ||
| Sub-Total | 10 | ||
| GRAND TOTAL | 25 | ||
Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Edge trimming knife | Shoe upper (MENT) |
| Sanding block | Shoe upper lining (RS) |
| Marking pencil | |
| Work bench |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Shoe upper (MENT) | 2 Pcs per Candidate |
| 2 | Shoe upper lining (RS) | 2 Pcs per Candidate |
| 3 | Edge trimming knife | 1 Pc per Candidate |
| 4 | Sanding block | 1 Pc per Candidate |
| 5 | Work bench | 1 Pc per Candidate |
| 6 | Marking pencil | 1 Pc per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Edge Trimming Process | |||
| Candidate wears appropriate PPE (gloves, apron) (Award 2 marks for correct PPE use, zero if none) | 2 | ||
| Candidate correctly sets up work area and secures shoe upper (Award 3 marks for proper setup and securing of materials) | 3 | ||
| Candidate marks trimming lines accurately on shoe upper edges (Award 3 marks for accurate marking following drawing lines) | 3 | ||
| Candidate uses edge trimming knife to trim edges smoothly (Award 4 marks for controlled and even trimming technique) | 4 | ||
| Candidate sands trimmed edges uniformly using sanding block (Award 3 marks for uniform sanding producing smooth edges) | 3 | ||
| Candidate cleans work area after completion (Award 1 mark for tidying work area post task) | 1 | ||
| Sub-Total | 16 | ||
| PRODUCT CHECKLIST | |||
| Edges trimmed to smooth, even contours matching approx. 300mm x 150mm dimensions (Award up to 10 marks for edge smoothness, contour evenness, and dimensional conformity) | 10 | ||
| Sub-Total | 10 | ||
| GRAND TOTAL | 26 | ||