Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Hand sewing needles | Prepared leather footwear upper components |
| Sewing machine | Decorative stitching threads |
| Tailor's chalk or marking pen | |
| Measuring tape | |
| Scissors |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Prepared leather footwear upper components | 2 Pcs per Candidate |
| 2 | Decorative stitching threads (polyester, assorted colors) | 1 spool per Candidate |
| 3 | Hand sewing needles | 3 Pcs per Candidate |
| 4 | Sewing machine (with decorative stitch capability) | 1 Pc per 2 Candidates |
| 5 | Tailor's chalk or marking pen | 1 Pc per Candidate |
| 6 | Measuring tape (1500 mm) | 1 Pc per Candidate |
| 7 | Scissors | 1 Pc per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Preparation and marking | |||
| Candidate wears appropriate PPE before starting the task (Award 2 marks for correct PPE use, 0 if not) | 2 | ||
| Candidate measures and marks the decorative stitching area accurately on the component (150mm x 100mm) (Award 3 marks for correct and neat marking, 0 if incorrect) | 3 | ||
| Candidate selects appropriate thread color and needle for decorative stitching (Award 2 marks for appropriate selection, 0 if incorrect) | 2 | ||
| Candidate prepares the sewing machine correctly or prepares hand stitching tools (Award 3 marks for correct setup, 0 if not) | 3 | ||
| Sub-Total | 10 | ||
| TASK 2: Execution of decorative stitching | |||
| Candidate applies even and consistent decorative stitching pattern along the marked area using hand or machine techniques (Award 5 marks for consistent, neat stitching, 0 if uneven or incomplete) | 5 | ||
| Candidate maintains correct tension and stitch length throughout the stitching (Award 4 marks for uniform tension and stitch length, 0 if inconsistent) | 4 | ||
| Candidate secures thread ends properly to prevent unraveling (Award 3 marks for secure thread ends, 0 if loose) | 3 | ||
| Candidate cleans the component of any marking residues after stitching (Award 2 marks for clean finishing, 0 if markings remain) | 2 | ||
| Sub-Total | 14 | ||
| PRODUCT CHECKLIST | |||
| Decorative stitching pattern dimensions match 150mm x 100mm marked area (Award 5 marks if within ±5mm tolerance, 0 if outside) | 5 | ||
| Stitching is neat, uniform in length and tension, and free from skipped stitches (Award 6 marks for neat, uniform stitching, 0 if poor quality) | 6 | ||
| Thread ends are properly secured with no loose threads (Award 3 marks for properly secured ends, 0 if loose) | 3 | ||
| No damage or distortion to the footwear component after stitching (Award 2 marks if component undamaged, 0 if damaged) | 2 | ||
| Sub-Total | 16 | ||
| GRAND TOTAL | 40 | ||
Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Marking chalk or pencil | Leather shoe upper component |
| Punching awl | Ornamental studs |
| Hammer | Rivets |
| Measuring tape or ruler | |
| Cutting board or anvil |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Leather shoe upper component | 1 Pc per Candidate |
| 2 | Ornamental studs | 20 Pcs per Candidate |
| 3 | Rivets | 20 Pcs per Candidate |
| 4 | Marking chalk or pencil | 1 Pc per Candidate |
| 5 | Punching awl | 1 Pc per Candidate |
| 6 | Hammer | 1 Pc per Candidate |
| 7 | Cutting board or anvil | 1 Pc per Candidate |
| 8 | Measuring tape or ruler | 1 Pc per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Preparation and Marking | |||
| Use of appropriate PPE before commencing work (Award 2 marks for correct PPE use, 0 if none) | 2 | ||
| Accurate measurement and marking of stud and rivet positions on shoe upper (Award up to 4 marks for correct spacing and alignment per drawing) | 4 | ||
| Selection of correct tools and materials before starting attachment (Award 2 marks for readiness and correct tools/materials) | 2 | ||
| Setting up work area with cutting board or anvil to protect surfaces (Award 2 marks for correct and safe setup) | 2 | ||
| Punching pilot holes at marked positions cleanly and accurately (Award up to 4 marks for neat, correctly placed holes) | 4 | ||
| Proper positioning and securing of studs and rivets before fixing (Award 3 marks for correct positioning and handling) | 3 | ||
| Use of hammering technique to fix studs and rivets securely without damaging leather (Award up to 5 marks for secure attachment and care) | 5 | ||
| Cleaning and inspection of work area and component after fixing (Award 2 marks for tidiness and inspection) | 2 | ||
| Compliance with health and safety procedures throughout the task (Award 3 marks for consistent safety compliance) | 3 | ||
| Sub-Total | 27 | ||
| PRODUCT CHECKLIST | |||
| Studs and rivets attached securely with no looseness (Award 5 marks if all studs and rivets are firmly fixed) | 5 | ||
| Even spacing of studs and rivets matching 20mm +/- 2mm spacing as per drawing (Award 6 marks for correct spacing tolerance) | 6 | ||
| No damage to leather upper around attachment points (Award 5 marks if leather is undamaged and neat) | 5 | ||
| Overall alignment of studs and rivets straight and parallel within 3mm deviation (Award 4 marks for neat alignment within tolerance) | 4 | ||
| Finished component dimensions: 250mm length x 150mm width maintained (Award 3 marks if dimensions conform to ±3mm) | 3 | ||
| Sub-Total | 23 | ||
| GRAND TOTAL | 50 | ||