Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Marking gauge | Tracing paper |
| Measuring tape 300mm | Leather component blank |
| Scriber |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Marking gauge | 1 Pc per Candidate |
| 2 | Measuring tape 300mm | 1 Pc per Candidate |
| 3 | Scriber | 1 Pc per Candidate |
| 4 | Tracing paper | 3 Sheets per Candidate |
| 5 | Leather component blank | 2 Pcs per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Component Marking Process | |||
| Candidate wears appropriate PPE before starting (Award 2 marks for correct PPE use, zero if not) | 2 | ||
| Candidate correctly measures component dimensions with measuring tape (Award 3 marks for accurate measurement taking) | 3 | ||
| Candidate sets marking gauge accurately to required dimensions (Award 3 marks for correct marking gauge setting) | 3 | ||
| Candidate marks component outlines clearly and precisely with scriber (Award 5 marks for neat and exact marking) | 5 | ||
| Candidate transfers outline markings correctly from tracing paper to leather blank (Award 3 marks for correct transfer technique) | 3 | ||
| Candidate maintains clean and organized workspace throughout (Award 2 marks for good housekeeping) | 2 | ||
| Sub-Total | 18 | ||
| PRODUCT CHECKLIST | |||
| Marked outlines on both leather blanks measure exactly 250mm length and 120mm width (Award 5 marks if both components match dimensions within ±2mm tolerance) | 5 | ||
| Marked outlines are symmetrical and consistent on both blanks (Award 4 marks for consistent and symmetrical markings) | 4 | ||
| Markings are clear, sharp, and easily visible for cutting (Award 3 marks for clarity and neatness) | 3 | ||
| Sub-Total | 12 | ||
| GRAND TOTAL | 30 | ||
Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Measuring ruler 300mm | Leather upper component |
| Prick punch | Rubber sole component |
| Marking gauge | |
| Marking chalk |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Leather upper component | 2 Pcs per Candidate |
| 2 | Rubber sole component | 2 Pcs per Candidate |
| 3 | Marking chalk | 1 Pc per Candidate |
| 4 | Measuring ruler 300mm | 1 Pc per Candidate |
| 5 | Prick punch | 1 Pc per Candidate |
| 6 | Marking gauge | 1 Pc per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Component Marking Process | |||
| Candidate wears appropriate PPE before starting (Award 2 marks if PPE worn properly, else 0) | 2 | ||
| Candidate correctly sets out and measures component dimensions (Award 3 marks for accurate measurement and layout) | 3 | ||
| Candidate uses marking gauge and chalk to mark drill points accurately (Award 4 marks for precise marking according to drawing) | 4 | ||
| Candidate uses prick punch to mark drill points clearly and consistently (Award 3 marks for neat and consistent punch marks) | 3 | ||
| Candidate cleans and prepares components after marking (Award 2 marks for tidiness and readiness for drilling) | 2 | ||
| Sub-Total | 14 | ||
| PRODUCT CHECKLIST | |||
| Drill points marked on leather upper component at correct positions within ±1mm of specified 250mm x 120mm layout (Award 6 marks if all drill points are within tolerance, else partial) | 6 | ||
| Drill points marked on rubber sole component at correct positions within ±1mm of specified 250mm x 120mm layout (Award 6 marks if all drill points are within tolerance, else partial) | 6 | ||
| All drill points are clearly visible and consistently punched for easy drilling (Award 4 marks if punch marks are clear and consistent) | 4 | ||
| Sub-Total | 16 | ||
| GRAND TOTAL | 30 | ||