Foot Wear Production  ·  Level 5
Foot Measurements And Calculations
Chapter 3: Identify footwear sizing system
📚 0 Topics

Chapter Practical Activities

Practical 1: Identify and Distinguish Common Footwear Sizing Systems

Foot Wear Production · Level 5
Foot Measurements And Calculations
PRACTICAL ASSESSMENT
TIME: 3 HOURS
⬇ PDFCandidate Instructions (Candidate Tool)

Type: Individual

INSTRUCTIONS TO CANDIDATE:
1.  You are required to perform the following task:
i.  Identify and distinguish between US, UK, EU, and Mondopoint footwear sizing systems using provided sizing charts and samples, recording key size differences.
2.  You have been provided with the following resources for the practical task:
Tools & EquipmentMaterials
Measuring tape (metric and imperial)Footwear sizing charts (US, UK, EU, Mondopoint)
Foot length measuring device (Brannock device or equivalent)Footwear samples (US, UK, EU, Mondopoint sizes)
Notebook and pen
⬇ PDFResources Required (Cutting List)
S/NItemQuantity
1Footwear sizing charts (US, UK, EU, Mondopoint)1 set per Candidate
2Measuring tape (metric and imperial)1 Pc per Candidate
3Foot length measuring device (Brannock device or equivalent)1 Pc per Candidate
4Footwear samples (US, UK, EU, Mondopoint sizes)4 Pairs per Candidate
5Notebook and pen1 set per Candidate
⬇ PDFAssessor Guide
Items to be EvaluatedMarks AvailableMarks ObtainedComments
TASK 1: Candidate Presentation and Safety
Appropriately wore PPE (dust coat, safety boots)
(Award 1 mark if all PPEs worn correctly, else 0)
1
Correctly observed safety on self and colleagues during handling of samples and tools
(Award 1 mark if safety observed, else 0)
1
Sub-Total2
TASK 2: Prepared Work Area and Tools
Arranged sizing charts, measuring tools and samples neatly on the workbench
(Award 1 mark if arranged properly, else 0)
1
Ensured work area was clean, well-lit, and free from hazards
(Award 1 mark if workplace prepared correctly, else 0)
1
Sub-Total2
TASK 3: Identification and Distinction of Footwear Sizing Systems
Correctly identified US footwear sizing system characteristics
(Award 2 marks for correct identification, else 0)
2
Correctly identified UK footwear sizing system characteristics
(Award 2 marks for correct identification, else 0)
2
Correctly identified EU footwear sizing system characteristics
(Award 2 marks for correct identification, else 0)
2
Correctly identified Mondopoint footwear sizing system characteristics
(Award 2 marks for correct identification, else 0)
2
Measured sample footwear sizes using measuring device and matched to appropriate sizing system
(Award 2 marks for accurate measurement and matching, else 0)
2
Recorded all findings accurately in notebook
(Award 1 mark for proper documentation, else 0)
1
Sub-Total11
TASK 4: Housekeeping and Tool Storage
Cleaned and organized work area after task completion
(Award 1 mark if cleaned properly, else 0)
1
Correctly stored all tools and materials in designated places
(Award 1 mark if stored correctly, else 0)
1
Sub-Total2
PRODUCT CHECKLIST
Accurately identified and distinguished US, UK, EU, and Mondopoint sizing systems based on sample measurements and charts
(Award up to 5 marks for accuracy and completeness)
5
Clear and accurate recording of size comparisons and system distinctions in notebook
(Award up to 3 marks for neatness and correctness)
3
Sub-Total8
GRAND TOTAL25
ASSESSMENT OUTCOME:   ☐ Competent    ☐ Not Yet Competent (competent if at least 50%)

Practical 2: Convert Foot Length Measurement to UK, US, and EU Footwear Sizes

Foot Wear Production · Level 5
Foot Measurements And Calculations
PRACTICAL ASSESSMENT
TIME: 4 HOURS
⬇ PDFCandidate Instructions (Candidate Tool)

Type: Individual

INSTRUCTIONS TO CANDIDATE:
1.  You are required to perform the following task:
i.  Measure a foot length of 270mm and convert it accurately into UK, US, and EU footwear sizes using the provided conversion chart.
2.  You have been provided with the following resources for the practical task:
Tools & EquipmentMaterials
Brannock Device (foot measuring tool)Foot Measurement Conversion Chart (UK, US, EU sizes)
Measuring Tape (metric and imperial scales)Writing Materials (pen and paper)
Calculator
⬇ PDFResources Required (Cutting List)
S/NItemQuantity
1Brannock Device (foot measuring tool)1 Pc per Candidate
2Measuring Tape (metric and imperial scales)1 Pc per Candidate
3Foot Measurement Conversion Chart (UK, US, EU sizes)1 Pc per Candidate
4Calculator1 Pc per Candidate
5Writing Materials (pen and paper)1 set per Candidate
⬇ PDFAssessor Guide
Items to be EvaluatedMarks AvailableMarks ObtainedComments
TASK 1: Check Student Presentation and Safety
Appropriately wore PPE (dust coat, closed shoes)
(Award 1 mark for correct PPE use, zero if not)
1
Observed safety on self and colleagues during measurement
(Award 1 mark for adherence to safety protocols)
1
Handled tools and equipment correctly and safely
(Award 1 mark for correct tool handling)
1
Sub-Total3
TASK 2: Prepare Work Area and Tools
Arranged work area to be clean and hazard-free
(Award 1 mark for proper work area preparation)
1
Ensured all measuring tools and conversion charts were ready and accessible
(Award 1 mark for tool and material preparation)
1
Sub-Total2
TASK 3: Measure Foot Length Accurately
Used Brannock Device or measuring tape correctly to measure foot length
(Award 2 marks for accurate measurement technique)
2
Recorded foot length as 270 mm accurately
(Award 1 mark for accurate recording of measurement)
1
Sub-Total3
TASK 4: Convert Foot Measurement to Different Sizing Systems
Used the conversion chart correctly to determine UK shoe size from 270 mm
(Award 2 marks for correct UK size conversion)
2
Used the conversion chart correctly to determine US shoe size from 270 mm
(Award 2 marks for correct US size conversion)
2
Used the conversion chart correctly to determine EU shoe size from 270 mm
(Award 2 marks for correct EU size conversion)
2
Recorded all converted sizes clearly and legibly
(Award 1 mark for clear recording)
1
Sub-Total7
TASK 5: Clean Up and Store Tools
Cleaned and stored the Brannock Device and measuring tape properly
(Award 1 mark for proper tool storage)
1
Disposed of any waste materials appropriately
(Award 1 mark for proper waste disposal)
1
Cleared work area and left it clean
(Award 1 mark for housekeeping)
1
Sub-Total3
PRODUCT CHECKLIST
Foot length measurement recorded as 270 mm
(Award 2 marks for exact measurement recording)
2
Accurate UK shoe size conversion matching 270 mm foot length
(Award 3 marks for correct UK size)
3
Accurate US shoe size conversion matching 270 mm foot length
(Award 3 marks for correct US size)
3
Accurate EU shoe size conversion matching 270 mm foot length
(Award 3 marks for correct EU size)
3
All sizes clearly and neatly presented
(Award 2 marks for neatness and clarity)
2
Sub-Total13
GRAND TOTAL31
ASSESSMENT OUTCOME:   ☐ Competent    ☐ Not Yet Competent (competent if at least 50%)
🔒

Free: practical guides, quick cards, workplace scenarios and more.

Create a free account
🔒Determine Correct Shoe Size Using Standard Footwear Sizing ChartsPractical 3
🔒Interpret Footwear Size Labels to Identify Sizing SystemPractical 4
🔒Compare and contrast footwear sizing systems used in different geographic regionsPractical 5
🔒Identify factors affecting footwear sizing systemsPractical 6
🔒Measure Foot Size Using a Brannock Device and Identify Footwear Sizing SystemPractical 7
🔒Identify and Document Footwear Sizing System for Custom FootwearPractical 8
🔒Explain Historical Development of Footwear Sizing SystemsPractical 9
🔒Match Foot Dimensions to Footwear Sizes Using Different Sizing SystemsPractical 10