Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Cutting knife | Leather sheets |
| Measuring tape | Synthetic lining material |
| Marking chalk | Adhesive glue 500ml |
| Cutting board | Thread spool (nylon) |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Leather sheets | 2 Pcs per Candidate |
| 2 | Synthetic lining material | 1 Pc per Candidate |
| 3 | Adhesive glue 500ml | 0.5 Bottle per Candidate |
| 4 | Thread spool (nylon) | 1 Spool per Candidate |
| 5 | Cutting knife | 1 Pc per Candidate |
| 6 | Measuring tape | 1 Pc per Candidate |
| 7 | Marking chalk | 1 Pc per Candidate |
| 8 | Cutting board | 1 Pc per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Material selection and measurement | |||
| Wears appropriate PPE before starting work (Award 2 marks for correct PPE use; 0 if missing) | 2 | ||
| Selects suitable leather sheet according to quality standards (Award 3 marks for correct selection; 0 if incorrect) | 3 | ||
| Measures leather sheet accurately to 350mm length and 120mm width (Award 3 marks for measurements within ±5mm tolerance; 0 if outside) | 3 | ||
| Marks cutting lines clearly and accurately on leather and lining (Award 2 marks for clear and precise marking; 0 if unclear) | 2 | ||
| Cuts leather and lining materials cleanly along marked lines (Award 3 marks for neat and accurate cutting; 0 if jagged or inaccurate) | 3 | ||
| Sub-Total | 13 | ||
| TASK 2: Material preparation for assembly | |||
| Applies adhesive glue evenly on cut materials as per instructions (Award 3 marks for uniform glue application; 0 if uneven) | 3 | ||
| Prepares thread spool and checks for quality and strength (Award 2 marks for thread preparation; 0 if not checked) | 2 | ||
| Organizes prepared materials and tools neatly for assembly (Award 2 marks for good organization; 0 if messy) | 2 | ||
| Sub-Total | 7 | ||
| PRODUCT CHECKLIST | |||
| Leather and lining cut to 350mm length ±5mm and 120mm width ±5mm (Award 5 marks if dimensions within tolerance; 0 if outside) | 5 | ||
| Edges of cut materials are clean, straight and without frays (Award 3 marks for clean edges; 0 if frayed or uneven) | 3 | ||
| Adhesive applied uniformly without excess or gaps (Award 2 marks for neat glue application; 0 if patchy or excessive) | 2 | ||
| Sub-Total | 10 | ||
| GRAND TOTAL | 30 | ||
Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Cutting knife | Leather upper pieces |
| Cutting board | Lining fabric sheets |
| Measuring tape | Insole board sheets |
| Chalk marker | |
| Templates for footwear components |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Leather upper pieces | 5 Pcs per Candidate |
| 2 | Lining fabric sheets | 3 Pcs per Candidate |
| 3 | Insole board sheets | 2 Pcs per Candidate |
| 4 | Cutting knife | 1 Pc per Candidate |
| 5 | Templates for footwear components | 1 Set per Candidate |
| 6 | Cutting board | 1 Pc per Candidate |
| 7 | Measuring tape | 1 Pc per Candidate |
| 8 | Chalk marker | 1 Pc per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Preparation and cutting process | |||
| Candidate wears appropriate PPE (gloves, apron) (Award 2 marks for correct PPE use, 0 if not) | 2 | ||
| Candidate sets up cutting board and arranges materials (Award 3 marks for proper setup and organization) | 3 | ||
| Candidate aligns templates correctly on materials (Award 4 marks for correct placement of templates) | 4 | ||
| Candidate marks cutting lines accurately with chalk marker (Award 5 marks for clear, precise marking matching templates) | 5 | ||
| Candidate cuts components cleanly following marked lines (Award 8 marks for neat and precise cutting with minimal waste) | 8 | ||
| Candidate handles tools safely and maintains control (Award 3 marks for safe and proper tool handling) | 3 | ||
| Sub-Total | 25 | ||
| PRODUCT CHECKLIST | |||
| Leather upper pieces cut to approximately 300mm x 120mm with smooth edges (Award 6 marks for correct dimensions and smooth edges) | 6 | ||
| Lining fabric pieces cut to approximately 280mm x 110mm accurately (Award 5 marks for accurate cutting matching template) | 5 | ||
| Insole board pieces cut to approximately 290mm x 115mm with clean edges (Award 5 marks for clean, accurate cutting) | 5 | ||
| All components free from tears, holes, or damage (Award 4 marks if components are intact and undamaged) | 4 | ||
| Sub-Total | 20 | ||
| GRAND TOTAL | 45 | ||