Wildlife Management  ·  Level 5
Human-Wildlife Interactions
Chapter 5: Integrate wildlife management into the community
📚 0 Topics

Chapter Practical Activities

Practical 1: Community Wildlife Conflict Assessment Survey

Wildlife Management · Level 5
Human-Wildlife Interactions
PRACTICAL ASSESSMENT
TIME: 4 HOURS
⬇ PDFCandidate Instructions (Candidate Tool)

Type: Individual

INSTRUCTIONS TO CANDIDATE:
1.  You are required to perform the following task:
i.  Conduct a detailed field survey and produce a conflict report identifying and mapping at least three human-wildlife conflict hotspots within a 2 km² area of the community adjacent to the conservancy.
2.  You have been provided with the following resources for the practical task:
Tools & EquipmentMaterials
Field notebookFoolscap sheets
Ballpoint penPersonal protective equipment (PPE) - safari boots, gloves, hat
Digital camera
GPS device
Measuring tape 30m
Printed community map
⬇ PDFResources Required (Cutting List)
S/NItemQuantity
1Field notebook1 Pc per Candidate
2Ballpoint pen1 Pc per Candidate
3Digital camera1 Pc per 2 Candidates
4GPS device1 Pc per 3 Candidates
5Measuring tape 30m1 Pc per Candidate
6Personal protective equipment (PPE) - safari boots, gloves, hat1 set per Candidate
7Printed community map (scale 1:10,000)1 Pc per Candidate
8Foolscap sheets5 Sheets per Candidate
⬇ PDFAssessor Guide
Items to be EvaluatedMarks AvailableMarks ObtainedComments
TASK 1: Preparation and Personal Presentation
Wearing prescribed field gear (safari boots, khaki/green field gear, hat)
(Award 2 marks if full correct PPE is worn; 1 mark if partial; 0 if none)
2
Use of gloves during survey activities
(Award 1 mark if gloves worn properly during survey)
1
Confidence and audibility during briefing and field interactions
(Award 1 mark for clear, confident communication)
1
Well-groomed hair and nails (short nails)
(Award 1 mark if grooming standard met)
1
Sub-Total5
TASK 2: Field Survey and Data Collection
Correct use of GPS device to record coordinates of conflict points
(Award 3 marks for accurate GPS use and recording)
3
Identification and documentation of at least three human-wildlife conflict hotspots
(Award 5 marks if three or more hotspots identified with descriptions)
5
Photographic evidence captured for each hotspot
(Award 3 marks if clear photos are taken for each hotspot)
3
Use of measuring tape to estimate affected area dimensions at each hotspot
(Award 3 marks if area measurements are recorded accurately)
3
Marking and annotating locations on the printed community map
(Award 3 marks for correct map marking and annotations)
3
Sub-Total17
TASK 3: Reporting and Presentation
Clear, structured written report including hotspot descriptions and recommendations
(Award 5 marks for comprehensive, clear report)
5
Use of foolscap sheets for organized note-taking and sketches
(Award 2 marks if notes and sketches are neat and relevant)
2
Oral presentation of findings to assessor with confidence and clarity
(Award 3 marks for confident, audible presentation)
3
Ability to answer questions about survey methodology and findings
(Award 3 marks for appropriate responses)
3
Sub-Total13
PRODUCT CHECKLIST
Report includes identification of at least three conflict hotspots with GPS coordinates
(Award 5 marks if all hotspots and coordinates are correct)
5
Conflict hotspot areas mapped accurately on community map with clear annotations
(Award 5 marks if map is accurate and clear)
5
Photographic documentation is clear, relevant, and corresponds to reported hotspots
(Award 5 marks for quality and relevance of photos)
5
Measurements of affected areas are accurate within ±5% tolerance
(Award 5 marks if area measurements are accurate)
5
Sub-Total20
GRAND TOTAL55
ASSESSMENT OUTCOME:   ☐ Competent    ☐ Not Yet Competent (competent if at least 50%)

Practical 2: Design a community wildlife buffer zone layout plan

Wildlife Management · Level 5
Human-Wildlife Interactions
PRACTICAL ASSESSMENT
TIME: 4 HOURS
⬇ PDFCandidate Instructions (Candidate Tool)

Type: Individual

INSTRUCTIONS TO CANDIDATE:
1.  You are required to perform the following task:
i.  Prepare a buffer zone layout plan for a 100m by 80m community agricultural land showing designated buffer zones with widths of 10m, 15m, and 20m as per the provided reference map.
2.  You have been provided with the following resources for the practical task:
Tools & EquipmentMaterials
Measuring tape 30mFoolscap papers
Ruler 30cmReference map of community land (A3 size)
ProtractorField notebook
Colored pens and pencils
Clipboard
⬇ PDFResources Required (Cutting List)
S/NItemQuantity
1Foolscap papers5 Pcs per Candidate
2Colored pens and pencils1 set per Candidate
3Measuring tape 30m1 Pc per 5 Candidates
4Ruler 30cm1 Pc per Candidate
5Protractor1 Pc per 5 Candidates
6Clipboard1 Pc per Candidate
7Field notebook1 Pc per Candidate
8Reference map of community land (A3 size)1 Pc per Candidate
⬇ PDFAssessor Guide
Items to be EvaluatedMarks AvailableMarks ObtainedComments
TASK 1: Preparation and Use of PPE
Candidate wears appropriate field gear (boots, khaki/green field uniform, hat)
(Award 2 marks for full compliance or 0)
2
Candidate uses gloves during layout marking
(Award 1 mark for use or 0)
1
Candidate demonstrates audibility and confidence during oral explanation of buffer zone purpose
(Award 2 marks for clear audibility and confidence or 0)
2
Sub-Total5
TASK 2: Field Measurement and Layout Planning
Candidate measures and marks the 100m by 80m community land correctly
(Award 3 marks for accurate measurement or 0)
3
Candidate correctly delineates buffer zones of widths 10m, 15m, and 20m around the land perimeter
(Award 4 marks for correct buffer zone widths or 0)
4
Candidate uses measuring tape, ruler and protractor correctly for layout angles and lines
(Award 3 marks for proper use or 0)
3
Sub-Total10
TASK 3: Drawing and Presentation of Layout Plan
Candidate produces a clear and legible layout plan on foolscap paper
(Award 2 marks for clarity and neatness or 0)
2
Candidate correctly annotates buffer zones with their respective widths
(Award 2 marks for correct annotation or 0)
2
Candidate includes a legend and north arrow on the layout plan
(Award 1 mark for inclusion or 0)
1
Candidate explains the buffer zone design showing understanding of wildlife management integration
(Award 3 marks for clear explanation or 0)
3
Sub-Total8
PRODUCT CHECKLIST
Layout plan dimensions: overall 10000mm x 8000mm (scaled 1:1000) with buffer zones 100mm, 150mm, and 200mm widths correctly shown
(Award 5 marks for accurate scaled dimensions or 0)
5
Buffer zones correctly located and consistently labeled
(Award 4 marks for correct location and labeling or 0)
4
Drawing is neat, legible, and includes north arrow and legend
(Award 3 marks for presentation or 0)
3
Sub-Total12
GRAND TOTAL35
ASSESSMENT OUTCOME:   ☐ Competent    ☐ Not Yet Competent (competent if at least 50%)
🔒

Free: practical guides, quick cards, workplace scenarios and more.

Create a free account
🔒Construction of a 10m Wildlife-Friendly Fence SectionPractical 3
🔒Installation of Wildlife Warning Signage at Community Access PointsPractical 4
🔒Setup of Community Awareness Workshop Demonstration Area for Wildlife ManagementPractical 5
🔒Prepare and plant native vegetation to restore a 10m x 5m wildlife corridorPractical 6
🔒Implement a community waste disposal system to deter wildlifePractical 7
🔒Construction of a Wildlife Water Point 2000mm x 1500mm x 1200mmPractical 8
🔒Installation of camera traps for wildlife monitoring near community areasPractical 9
🔒Development of a Community Wildlife Management PlanPractical 10