Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Wire cutters | Steel fence posts |
| Hammer | Barbed wire rolls |
| Measuring tape 30m | Concrete mix (bags) |
| Spirit level | Gloves (PPE) |
| Safety boots (PPE) | |
| Protective hat |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Steel fence posts | 10 Pcs per Candidate |
| 2 | Barbed wire rolls | 3 Rolls per Candidate |
| 3 | Concrete mix (bags) | 4 Bags per Candidate |
| 4 | Wire cutters | 1 Pc per Candidate |
| 5 | Hammer | 1 Pc per Candidate |
| 6 | Measuring tape 30m | 1 Pc per Candidate |
| 7 | Spirit level | 1 Pc per Candidate |
| 8 | Gloves (PPE) | 1 Pair per Candidate |
| 9 | Safety boots (PPE) | 1 Pair per Candidate |
| 10 | Protective hat | 1 Pc per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Preparation and PPE | |||
| Candidate wears safety boots, gloves, and protective hat before starting work (Award 1 mark each for boots, gloves, and hat worn correctly) | 3 | ||
| Candidate measures and marks the 20m fence line accurately (Award 2 marks for accurate measurement within ±50mm) | 2 | ||
| Candidate sets out and spaces steel posts at 2m intervals along fence line (Award 1 mark per correctly spaced post, max 3 marks) | 3 | ||
| Candidate mixes concrete to proper consistency for post setting (Award 2 marks for correct concrete mix and handling) | 2 | ||
| Sub-Total | 10 | ||
| TASK 2: Fence post installation | |||
| Candidate digs post holes to at least 600mm deep and 150mm diameter (Award 3 marks for correct hole dimensions and depth) | 3 | ||
| Candidate sets posts vertically using spirit level and secures with concrete (Award 2 marks for vertical alignment and 2 marks for proper concrete setting) | 4 | ||
| Candidate allows initial concrete set before proceeding (Award 1 mark for observing appropriate curing time or method) | 1 | ||
| Sub-Total | 8 | ||
| TASK 3: Barbed wire fixing | |||
| Candidate attaches three rows of barbed wire at heights 300mm, 900mm, and 1500mm from ground (Award 1 mark for each correctly positioned wire row) | 3 | ||
| Candidate fixes barbed wire tightly and securely to posts using appropriate tools (Award 3 marks for tension, secure knots, and neat fixing) | 3 | ||
| Candidate cuts excess wire cleanly with wire cutters (Award 1 mark for neat and safe wire cutting) | 1 | ||
| Sub-Total | 7 | ||
| TASK 4: Finishing and safety | |||
| Candidate cleans work area removing debris and excess materials (Award 2 marks for thorough cleaning) | 2 | ||
| Candidate demonstrates safe handling of barbed wire and tools throughout (Award 2 marks for safe practices and PPE use during task) | 2 | ||
| Candidate presents completed fence and explains its wildlife-proof features (Award 3 marks for confident and accurate explanation) | 3 | ||
| Sub-Total | 7 | ||
| PRODUCT CHECKLIST | |||
| Fence length is 20,000mm ±50mm as per drawing (Award 3 marks for length within tolerance) | 3 | ||
| Fence height is 1,800mm ±20mm with three wire rows at 300mm, 900mm, and 1500mm ±10mm (Award 4 marks for height and wire row spacing accuracy) | 4 | ||
| Posts are vertically plumb and spaced evenly at 2,000mm ±50mm (Award 4 marks for plumbness and post spacing) | 4 | ||
| Barbed wire is taut with no sagging and securely fixed (Award 3 marks for wire tension and secure fixing) | 3 | ||
| Fence is free from sharp wire ends or hazards, and neat in appearance (Award 2 marks for safety and neatness) | 2 | ||
| Sub-Total | 16 | ||
| GRAND TOTAL | 48 | ||
Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Cordless drill with screwdriver bits | Solar-powered wildlife alarm unit |
| Measuring tape (5m) | Mounting poles (galvanized steel, 2m length) |
| Spirit level | Steel mounting brackets |
| Multimeter | Rechargeable 12V battery |
| Marker pen | Solar panel 50W |
| Electrical wiring (3-core, 10m length) | |
| Screws and bolts set | |
| Cable ties | |
| Insulating electrical tape |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Solar-powered wildlife alarm unit | 1 Pc per Candidate |
| 2 | Mounting poles (galvanized steel, 2m length) | 2 Pcs per Candidate |
| 3 | Steel mounting brackets | 4 Pcs per Candidate |
| 4 | Rechargeable 12V battery | 1 Pc per Candidate |
| 5 | Solar panel 50W | 1 Pc per Candidate |
| 6 | Electrical wiring (3-core, 10m length) | 10 m per Candidate |
| 7 | Screws and bolts set | 1 set per Candidate |
| 8 | Cable ties | 10 Pcs per Candidate |
| 9 | Insulating electrical tape | 1 roll per Candidate |
| 10 | Safety gloves | 1 pair per Candidate |
| 11 | Safety boots | 1 pair per Candidate |
| 12 | Khaki field gear (trousers and shirt) | 1 set per Candidate |
| 13 | Cape/hat | 1 Pc per Candidate |
| 14 | Multimeter | 1 Pc per Candidate |
| 15 | Cordless drill with screwdriver bits | 1 Pc per Candidate |
| 16 | Measuring tape (5m) | 1 Pc per Candidate |
| 17 | Spirit level | 1 Pc per Candidate |
| 18 | Marker pen | 1 Pc per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Personal Protective Equipment and Preparation | |||
| Candidate wears complete field gear including boots, khaki uniform, and hat/cape (Award 2 marks if all worn correctly, else 0) | 2 | ||
| Candidate wears safety gloves before handling electrical components (Award 1 mark if gloves worn at appropriate times, else 0) | 1 | ||
| Sub-Total | 3 | ||
| TASK 2: Installation of Mounting Poles and Alarm Unit | |||
| Candidate measures and marks 1.5m spacing between two mounting poles accurately (Award 2 marks for correct measurement within ±25mm, else 0) | 2 | ||
| Candidate fixes mounting poles vertically plumb using spirit level (Award 2 marks if poles are plumb within ±2 degrees, else 0) | 2 | ||
| Candidate attaches alarm unit securely to mounting poles using brackets and screws (Award 3 marks if alarm is firmly fixed without wobble, else 0) | 3 | ||
| Sub-Total | 7 | ||
| TASK 3: Electrical Connections and Calibration | |||
| Candidate connects solar panel, battery, and alarm unit wiring correctly according to schematic (Award 3 marks for correct polarity and connections, else 0) | 3 | ||
| Candidate insulates all wiring joints properly using electrical tape and cable ties (Award 2 marks if all joints insulated and tidy, else 0) | 2 | ||
| Candidate uses multimeter to verify voltage output and battery charge (Award 2 marks if readings taken and within expected range, else 0) | 2 | ||
| Candidate calibrates alarm sensitivity and tests alarm audibility (Award 3 marks if alarm triggers correctly and is audible at 20m, else 0) | 3 | ||
| Sub-Total | 10 | ||
| TASK 4: Site Clean-Up and Reporting | |||
| Candidate cleans work area of debris and excess materials (Award 1 mark if area left clean, else 0) | 1 | ||
| Candidate completes and submits installation checklist/report accurately (Award 2 marks if report is complete and legible, else 0) | 2 | ||
| Sub-Total | 3 | ||
| PRODUCT CHECKLIST | |||
| Alarm unit mounted at 1.5m spacing on poles, dimensions 600mm x 400mm x 300mm confirmed (Award 3 marks if dimensions and spacing are as specified, else 0) | 3 | ||
| Mounting poles vertically plumb within ±2 degrees (Award 2 marks if poles plumb, else 0) | 2 | ||
| Alarm system functions correctly: solar panel charging, battery powering alarm, alarm audible at 20m (Award 5 marks if all functions verified, else 0) | 5 | ||
| Sub-Total | 10 | ||
| GRAND TOTAL | 33 | ||