By the end of this chapter, you will be able to:
Mastering these skills helps you work efficiently and confidently in poultry production, setting a strong foundation for success in the trade.
Compiled by: James Ogutu
Managing layer poultry efficiently demands the use of appropriate tools, equipment and materials that support the health, productivity and welfare of the birds. In Kenya’s poultry industry, smallholder and commercial farmers alike depend on these resources to optimize egg production and maintain biosecurity. Understanding the specifications, uses and maintenance of these implements is essential for animal production professionals involved in layer management, as it directly influences operational costs and output quality.
A layer house keeps hens for up to a year or more of daily egg production, so every fitting is used daily for a long time. Good equipment gives each hen easy access to feed and clean water, keeps the house at a steady temperature and humidity, and keeps the floor dry. When any of these fails, egg numbers, egg size and shell quality drop before the keeper sees a sick bird. The tools below are those of the layer house, and the ones that overlap with the brooding house are described there for the needs of day-old chicks.
| Name | Specification | Use |
|---|---|---|
| Waterers | Nipple lines with drip cups, or bell and trough drinkers, of plastic or galvanised metal | Give every hen clean water at all hours |
| Feeders | Trough, chain or hanging tube feeders of galvanised steel or plastic | Hold layer feed within reach of every hen |
| Thermometer | Maximum and minimum type, reading in °C | Records the hottest and coldest temperature of the house |
| Litter material | Dry, absorbent, dust-free material such as wood shavings or rice husks | Covers the floor of a deep litter house |
| Curtains | Polythene or woven polypropylene on cords or rollers | Control draught, rain and daylight on open sides |
| False ceilings | Plywood, hardboard or polythene lining under the roof | Lower the heat load from the roof |
| Hygrometer | Wet and dry bulb or digital type showing relative humidity | Shows the humidity of the house air |
| Egg trays and baskets | Stackable plastic or paper trays holding 30 eggs, and a plastic basket | Hold eggs clean and unbroken from nest to store |
| Manure scraper | Wooden or metal blade on a handle | Removes droppings from slatted floors and dropping boards |
Layers drink about twice as much water as the mass of feed they eat in mild weather, and more in hot weather, so a hen that cannot find water soon lays fewer eggs. Nipple drinkers on a line over the floor or cages keep water clean, because the hen drinks only the drop she releases. The drinker line is hung so that the nipples are level with the hens' eyes or just above, and the height is raised as the pullets grow. Flush the lines regularly to remove slime and algae, check the pressure at both ends of a long line, and replace any nipple that drips, because a dripping nipple wets the litter and produces ammonia.
A layer feeder must let every hen eat at the same time, because hens that are crowded out eat less and the flock becomes uneven. Chain feeders carry feed along a trough at set times and suit large houses, while hanging tube feeders and troughs suit smaller floor flocks. Feeders are set at the height of the hen's back and are not overfilled, as spilt feed is lost and attracts rats. Wash and dry feeders regularly, because wet feed grows mould that can poison hens, and keep the space per hen within the guide for the strain.
A layer house is larger than a brooder, so temperatures vary along it, and one thermometer is not enough. A maximum and minimum thermometer at bird height at the middle and at each end shows the extremes, and its readings are recorded each morning. Hang it away from direct sun, drinkers and fans. When the maximum climbs far above the comfortable range, the keeper opens curtains and adds air movement. What the temperature should be and how to respond to it is dealt with under microclimate monitoring.
In a deep litter layer house the floor is covered with dry litter, and the hens scratch and dust-bathe in it. The litter should be deep enough to stay springy and absorb moisture. Wood shavings, rice husks and chopped dry straw are used where they are cheap, and sawdust from preservative-treated timber is never used. Stir the litter regularly with a rake to stop it caking, remove wet patches by the drinkers at once, and top up with dry material. Used litter goes to composting and later to the garden or crops as manure.
In a layer house with open sides, curtains take the place of walls. Rolled down at night and in cold rain they keep the hens warm and dry, and rolled up in the day they let air flow through to carry off heat, moisture and ammonia. They also control the daylight in the house, which matters for layers, because day length controls laying and the amount of light should not change suddenly. Curtains should hang tight, without gaps that cause draughts, and be raised and lowered on cords so that one person can change them without entering the house.
A false ceiling under an iron-sheet roof cuts the heat that radiates down onto the hens at midday, so the birds eat more steadily and shell quality is protected. It also reduces draughts and holds warmth on cool nights. Use a material that does not absorb moisture and cannot be gnawed by rats, close all gaps, and keep vents in the roof space so that hot, damp air can escape. Inspect it regularly for sagging or holes.
Layer houses give off a great deal of moisture from droppings, breath and spilt water. A hygrometer shows when humidity is too high, which wets litter, raises ammonia and favours coccidiosis and mould, or too low, which makes the house dusty. Hang it near the thermometer at bird height, and read the two together at the same times each day. Record readings in the house diary so that changes over days and weeks can be seen.
Create a free account to open more of this chapter.
Free: practical guides, quick cards, workplace scenarios and more.
Create a free accountThis chapter covers the essential tools, equipment, and materials required for managing layer poultry effectively, emphasizing their roles in daily operations. Proper sanitization procedures for the layers house are outlined to maintain a hygienic environment that prevents disease. The importance of microclimate monitoring is discussed to ensure optimal temperature, humidity, and ventilation for bird comfort and productivity. Feeding practices tailored to the nutritional needs of laying birds are explained to maximize egg production. Vaccination protocols are detailed alongside methods for observing post-vaccination behavior to detect any adverse reactions early. The chapter also addresses the collection, sorting, grading, and cleaning of table eggs to maintain quality standards. Packaging and branding techniques are explored to enhance marketability and consumer trust. Finally, systematic recording of poultry layers and effective waste management practices are presented as critical components of sustainable poultry production.
At the start of this chapter we promised you would be able to:
Tick each one you can genuinely do.
So, are you there yet?
You're competent when you can confidently do 50% or more of what this chapter promised.
Sign in to record how you're doing.