Graphics Design  ·  Level 6
Photography
Chapter 4: Disassemble photography set
📚 0 Topics

Chapter Practical Activities

Practical 1: Disassemble and Remove Light Stands from Photography Set

Graphics Design · Level 6
Photography
PRACTICAL ASSESSMENT
TIME: 3 HOURS
⬇ PDFCandidate Instructions (Candidate Tool)

Type: Individual

INSTRUCTIONS TO CANDIDATE:
1.  You are required to perform the following task:
i.  Remove and collapse two adjustable tripod light stands each approximately 2 meters high from the photography set as per studio safety standards.
2.  You have been provided with the following resources for the practical task:
Tools & EquipmentMaterials
Light stands (adjustable tripod type)Light bulbs for softboxes
Softbox lighting units
Protective gloves
Cleaning cloth
⬇ PDFResources Required (Cutting List)
S/NItemQuantity
1Light stands (adjustable tripod type)2 Pcs per Candidate
2Softbox lighting units2 Pcs per Candidate
3Light bulbs for softboxes2 Pcs per Candidate
4Photography studio space, minimum 3m x 3m1 Area per Candidate
5Protective gloves1 Pair per Candidate
6Cleaning cloth1 Pc per Candidate
⬇ PDFAssessor Guide
Items to be EvaluatedMarks AvailableMarks ObtainedComments
TASK 1: Disassemble Light Stands
Wore protective gloves before handling equipment
(Award 2 marks or 0)
2
Switched off and unplugged all lighting units safely
(Award 2 marks or 0)
2
Carefully detached softbox lighting units from light stands
(Award 2 marks or 0)
2
Removed light bulbs safely without damage
(Award 2 marks or 0)
2
Collapsed light stands by loosening and folding tripod legs
(Award 3 marks or 0)
3
Cleaned light stands and softboxes with cleaning cloth to remove dust
(Award 2 marks or 0)
2
Stacked all components neatly for storage or transport
(Award 3 marks or 0)
3
Sub-Total16
PRODUCT CHECKLIST
Both light stands fully collapsed to approximately 70cm length
(Award 3 marks or 0)
3
Softbox units detached and bulbs removed without damage
(Award 3 marks or 0)
3
All components cleaned and stacked neatly
(Award 4 marks or 0)
4
Sub-Total10
GRAND TOTAL26
ASSESSMENT OUTCOME:   ☐ Competent    ☐ Not Yet Competent (competent if at least 50%)

Practical 2: Disconnect and Remove Studio Lights from Mounts

Graphics Design · Level 6
Photography
PRACTICAL ASSESSMENT
TIME: 3 HOURS
⬇ PDFCandidate Instructions (Candidate Tool)

Type: Individual

INSTRUCTIONS TO CANDIDATE:
1.  You are required to perform the following task:
i.  Safely disconnect and remove two studio lights mounted on stands each measuring 2 meters high from the studio setup as per safety standards.
2.  You have been provided with the following resources for the practical task:
Tools & EquipmentMaterials
Insulated glovesStudios lights with mounting stands
Screwdriver setPower extension cords
Cable tiesWorkshop manual for studio lights
Lint-free cleaning cloth
⬇ PDFResources Required (Cutting List)
S/NItemQuantity
1Studios lights with mounting stands1 set per Candidate
2Power extension cords1 Pc per Candidate
3Insulated gloves1 pair per Candidate
4Screwdriver set (flat head and Phillips)1 set per 5 Candidates
5Cable ties5 Pcs per Candidate
6Lint-free cleaning cloth1 Pc per Candidate
7Workshop manual for studio lights1 Pc per Candidate
⬇ PDFAssessor Guide
Items to be EvaluatedMarks AvailableMarks ObtainedComments
TASK 1: Disconnect Studio Lights
Wore insulated gloves before handling electrical equipment
(Award 2 marks or 0)
2
Turned off power supply and unplugged studio lights safely
(Award 3 marks or 0)
3
Loosened mounting screws using appropriate screwdriver without damaging equipment
(Award 3 marks or 0)
3
Carefully removed studio lights from stands without dropping or damaging
(Award 3 marks or 0)
3
Coiled and secured power cords neatly using cable ties
(Award 2 marks or 0)
2
Cleaned dust from light fixtures using lint-free cloth
(Award 2 marks or 0)
2
Sub-Total15
PRODUCT CHECKLIST
Both studio lights disconnected, removed, and mounted stands left stable and undamaged
(Award 5 marks or 0)
5
Power cords coiled neatly and equipment cleaned properly
(Award 5 marks or 0)
5
Sub-Total10
GRAND TOTAL25
ASSESSMENT OUTCOME:   ☐ Competent    ☐ Not Yet Competent (competent if at least 50%)
🔒

Free: practical guides, quick cards, workplace scenarios and more.

Create a free account
🔒Dismantle backdrop support system with 3m width and 2.5m height framePractical 3
🔒Pack softboxes and light modifiers for storagePractical 4
🔒Remove and pack reflectors and diffusers from photography setPractical 5
🔒Disassemble camera tripod safely and packPractical 6
🔒Coil and store power cables from photography setPractical 7
🔒Remove light meters and small accessories from photography setPractical 8
🔒Inspect and clean disassembled photography set componentsPractical 9
🔒Organize and pack photography equipment for transportPractical 10