Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Closing Hammer | Sewing Thread (polyester, 100m) |
| Awl | |
| Thread Trimmer Scissors | |
| Closing Machine Needle | |
| Measuring Tape | |
| Footwear Closing Machine | |
| Protective Gloves |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Closing Hammer | 1 Pc per Candidate |
| 2 | Awl | 1 Pc per Candidate |
| 3 | Thread Trimmer Scissors | 1 Pc per Candidate |
| 4 | Closing Machine Needle | 2 Pcs per Candidate |
| 5 | Sewing Thread (polyester, 100m) | 1 Roll per Candidate |
| 6 | Measuring Tape (1500mm) | 1 Pc per Candidate |
| 7 | Footwear Closing Machine | 1 Pc per 2 Candidates |
| 8 | Protective Gloves | 1 Pair per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Identification and selection of closing tools and equipment | |||
| Wears protective gloves before handling tools (Award 2 marks if gloves are worn properly, else 0) | 2 | ||
| Selects closing hammer suitable for the task (Award 3 marks for correct hammer selection, else 0) | 3 | ||
| Identifies and selects appropriate awl for piercing (Award 3 marks for correct awl selection, else 0) | 3 | ||
| Selects correct closing machine needles per footwear type (Award 4 marks for selecting suitable needles, else 0) | 4 | ||
| Chooses correct sewing thread type and length (Award 3 marks for correct thread selection, else 0) | 3 | ||
| Inspects and selects functioning footwear closing machine (Award 3 marks for proper machine selection, else 0) | 3 | ||
| Uses measuring tape correctly to verify tool sizes (Award 2 marks for correct measurement, else 0) | 2 | ||
| Sub-Total | 20 | ||
| PRODUCT CHECKLIST | |||
| All tools and equipment correctly identified and selected as per the working drawing and operation requirements (Award up to 10 marks based on completeness and correctness of selection) | 10 | ||
| Sub-Total | 10 | ||
| GRAND TOTAL | 30 | ||
Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Cutting scissors | Thread cones (polyester, 1200m) |
| Measuring tape | Adhesive solvent (500ml bottle) |
| Brush for adhesive application | Fabric lining pieces (200mm x 150mm) |
| Marking chalk | |
| Protective gloves | |
| Protective apron |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Thread cones (polyester, 1200m) | 2 cones per Candidate |
| 2 | Adhesive solvent (500ml bottle) | 1 bottle per 3 Candidates |
| 3 | Fabric lining pieces (200mm x 150mm) | 5 pieces per Candidate |
| 4 | Cutting scissors | 1 pair per Candidate |
| 5 | Measuring tape (2 meters) | 1 per Candidate |
| 6 | Brush for adhesive application | 1 per Candidate |
| 7 | Protective gloves | 1 pair per Candidate |
| 8 | Protective apron | 1 per Candidate |
| 9 | Marking chalk | 1 piece per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Preparation and handling of closing materials | |||
| Wears protective gloves and apron before starting (Award 2 marks for correct PPE use, 0 if omitted) | 2 | ||
| Measures fabric lining pieces accurately to 200mm x 150mm (Award 3 marks for correct measurement and marking) | 3 | ||
| Cuts 5 fabric lining pieces neatly as per measurements (Award 4 marks for neat and accurate cutting) | 4 | ||
| Prepares thread cones ensuring correct type and length (Award 3 marks for readiness of 2 polyester thread cones) | 3 | ||
| Applies adhesive solvent correctly using brush without wastage (Award 4 marks for correct adhesive handling and application) | 4 | ||
| Handles all materials carefully to avoid contamination or damage (Award 2 marks for careful handling) | 2 | ||
| Cleans work area and safely stores unused materials after task (Award 2 marks for proper housekeeping) | 2 | ||
| Sub-Total | 20 | ||
| PRODUCT CHECKLIST | |||
| Fabric lining pieces cut to correct dimensions (200mm x 150mm) with neat edges (Award 5 marks for 5 pieces within ±2mm tolerance and neatness) | 5 | ||
| Thread cones prepared and ready for closing operations (Award 3 marks for correct thread type and length preparation) | 3 | ||
| Adhesive solvent applied uniformly on sample fabric piece without excessive waste (Award 4 marks for proper adhesive application and coverage) | 4 | ||
| Materials handled without damage or contamination (Award 3 marks for no visible damage or contamination) | 3 | ||
| Sub-Total | 15 | ||
| GRAND TOTAL | 35 | ||