Type: Individual
| Tools & Equipment | Materials |
|---|---|
| Measuring tape | Upper leather hide |
| Marking chalk | Component patterns |
| Tracing wheel | |
| Awl |
| S/N | Item | Quantity |
|---|---|---|
| 1 | Upper leather hide | 0.5 square meters per Candidate |
| 2 | Marking chalk | 1 piece per Candidate |
| 3 | Component patterns (men's shoe upper components set) | 1 set per Candidate |
| 4 | Measuring tape | 1 per Candidate |
| 5 | Tracing wheel | 1 per Candidate |
| 6 | Awl | 1 per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Component Marking Process | |||
| Candidate wears appropriate PPE before starting (e.g. gloves, apron). (Award 2 marks for correct PPE use or zero) | 2 | ||
| Candidate selects correct upper leather hide and lays it flat on the marking table. (Award 3 marks for correct selection and preparation or zero) | 3 | ||
| Candidate positions the component patterns correctly on the leather respecting grain and defect areas. (Award 5 marks for accurate and efficient layout or zero) | 5 | ||
| Candidate marks the component outlines clearly and accurately using chalk and tracing wheel. (Award 6 marks for clear, precise marking or zero) | 6 | ||
| Candidate marks all necessary component details such as stitch lines and notches using awl. (Award 4 marks for complete and accurate detail marking or zero) | 4 | ||
| Sub-Total | 20 | ||
| PRODUCT CHECKLIST | |||
| Marked components measure 300mm length and 120mm width within ±2mm tolerance. (Award 5 marks for correct dimensions or zero) | 5 | ||
| Component outlines are clean, continuous, and free from smudges or breaks. (Award 4 marks for neatness and clarity or zero) | 4 | ||
| All stitch lines and notches are clearly marked and correctly positioned as per the drawing. (Award 6 marks for complete and accurate detail marking or zero) | 6 | ||
| Sub-Total | 15 | ||
| GRAND TOTAL | 35 | ||
Type: Individual
| Tools & Equipment | Materials |
|---|---|
| marking templates for sole components | sole leather sheet |
| chalk marking pencil | |
| steel ruler 300mm | |
| tracing wheel | |
| cutting table mat |
| S/N | Item | Quantity |
|---|---|---|
| 1 | sole leather sheet | 1 piece 600mm x 400mm per Candidate |
| 2 | marking templates for sole components | 1 set per Candidate |
| 3 | chalk marking pencil | 1 piece per Candidate |
| 4 | steel ruler 300mm | 1 piece per Candidate |
| 5 | tracing wheel | 1 piece per Candidate |
| 6 | cutting table mat | 1 piece per Candidate |
| Items to be Evaluated | Marks Available | Marks Obtained | Comments |
|---|---|---|---|
| TASK 1: Preparation and marking out | |||
| Candidate wears appropriate PPE before starting (Award 2 marks for correct PPE worn, zero if not) | 2 | ||
| Candidate selects and arranges sole leather sheet on cutting table mat (Award 2 marks for correct layout and orientation, zero if not) | 2 | ||
| Candidate correctly places marking templates on sole leather as per layout (Award 1 mark per correctly positioned template, zero if incorrect) | 3 | ||
| Candidate uses chalk pencil and tracing wheel to mark outlines clearly and accurately (Award 4 marks for clean, continuous, and visible marking lines) | 4 | ||
| Candidate marks component identification and grain direction on sole leather (Award 2 marks for correct component labelling and grain direction) | 2 | ||
| Sub-Total | 13 | ||
| PRODUCT CHECKLIST | |||
| Marked sole components match the 600mm x 400mm leather sheet dimensions and conform to template shapes (Award up to 5 marks for accurate marking matching templates and sheet size) | 5 | ||
| Markings are clear, continuous, and correctly positioned with no overlapping or misalignment (Award 4 marks for neat, precise marking lines and correct placement) | 4 | ||
| Component identification and grain direction markings are legible and correctly oriented (Award 3 marks for correct labelling and grain direction) | 3 | ||
| Sub-Total | 12 | ||
| GRAND TOTAL | 25 | ||